specification control drawing tyco electronics corporation 300 constitutional drive menlo park, ca 94025 usa title: soldersleeve wire terminator unless otherwise specified dime nsions are in millimeters. inches dimensions are between brackets. document no.: d-141-31 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco reserves the ri ght to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 17-july-00 doc issue: 1 drawn by: m. foronda cage code: 06090 replaces: n/a dcr number: d000398 prod. rev.: e scale: none size: a sheet: 1 of 1 if this document is printed it becomes unc ontrolled. check for the latest revision. materials 1. insulation sleeve: heat shrinkable, transparen t blue, radiation cross-linked polyvinylidene fluoride. 2. solder preform with flux: solder: type sn63 per ansi j-std-006. flux: type rol1 per ansi j-std-004. application 1. this part is designed to attach a tin or silver plat ed wire to terminals with 2.54 (0.100) or greater center spacing. wire accommodation: jacket o.d.: 0.76 to 2.03 (0.030 to 0.080) gauge: awg 26 to 20 connector terminal: max. diagonal: 0.76 (0.030) height: 5.08 to 7.62 (0.200 to 0.300) 2. sleeve will recover to 0.76 (0.030) max. i.d. 3. this drawing forms part of raychem specification control drawing: d-711-04, 2.54 (0.100) centers d-711-07, 3.18 (0.125) centers d-711-08, 3.96 (0.156) centers
|
